SPECIALLY DESIGNED JET BOXES:

Distance between top and bottom nozzles is further reduced in the new SUPRA-5 DLX i, thus increasing the impact of air on the drying surface, providing better heat transfer, reducing the blower power consumption and achieving higher drying speeds.

All the chamber panels of Supra-5 DLX i are amply insulated with mineral wool to minimize the heat losses. Silicon sealing of doors and blower panels is offered as an option.
Supra-5 DLX i has floating chambers to take care of lateral and longitudinal expansions of chamber elements at elevated temperatures.

Supra-5 DLX i is available with heat exchanges suitable for Thermic Fluid or Steam circulation. Direct gas firing arrangement is also offered as option on SUPRA-5 DLX i - G version, Using dampers in the jet system, air flow on both sides of the fabric can be maintained for uniform drying or varied for special application like coating. The overall flow of blower fans ensure optimum air velocities of top and bottom jets, so even the lightest knit fabrics can be dried and finished without causing any distortion in the fabric.

ON-LINE FILTER CLEANING:

SUPRA-5 DLX i facilitates easy cleaning of filters during operation. This feature increases the efficiency of thermal exchange with an emphasis on operational safety.
 
 
 
 
 
HOT AIRS TENTER
HYDRAULIC JIGGER
DYEING PADDER
ROTARY PRINTING
LOOP STEAMER
SOFT-FLOW DYEING
SINGEING
SCOURING RANGE
BLEACHING RANGE
AFTER PRINT WASHER
WASHING RANGE
RELAX DRYER
TUMBLER DRYER
BALLOON PADDER
PEACHING
SUPER FINISHER